mechanical engineering | PROJECT WORK-I(Mechanical Stream) | DIPLOMA 5th and 6th Semester


 PROJECT WORK-I(Mechanical Stream)


 


Course Title: PROJECT WORK-I(Mechanical Stream)

Scheme (L:T:P) : 0:1:2

Total Contact Hours: 39

Course Code:

15ME58P

Type of Course:

Practice

Credit :-

Core/ Elective:

Practice

CIE- 25 Marks

Prerequisites: Application learned concepts form the previous semester studied courses.

 

 Course Objectives:                                                                                                     

 

1.       Learn the objective of this project is to provide opportunity for the students to implement their skills acquired in the previous semesters to practical problems/problems faced by industry/development of new facilities

2.       Make the students come up with innovative/ new ideas in his area of interest.

3.       Identify, analyze and develop opportunities as well as to solve broadly defined mechanical Engineering problems

4.       Enhance students’ appreciation of the values of social responsibility, legal and ethical principles, through the analysis and discussion of relevant articles and real time projects

 Course outcome                                                                                                     

On successful completion of the course, the students will be able to:

 

Course Outcome

CL

Linked PO

Allotted hours

CO1

Get an idea and confidence in

designing,                       analysing                       and executing the project.

 

Analysis/creation

 

1,2,3,4,8,9,10

 

 

 

 

 

 

 

 

3hrs/Week

 

CO2

Apply the knowledge of latest trends in fabrication/ manufacturing and Relate their ideas while executing the

project

 

Analysis/creation

 

1,2,3,4,8,9,10

CO3

Have complete understanding of Executing the project

Analysis/creation

1,2,3,4,8,9,10

CO4

Prepare documents in team and enhance his written and oral

communication presentations.

Analysis/creation

1,2,3,4,8,9,10

 

 

CO5

Develop individual confidence to handle various engineering assignments and expose themselves to acquire  life skills to meet societal

challenges

 

 

Analysis/creation

 

 

1,2,3,4,5,8,9,10

 

 

TOTAL

 

39 Hours


 MAPPING COURSE OUTCOMES WITH PROGRAM OUTCOMES                                                                                                       

 

 

 

 

 

Course

Programme Outcome

PO1

PO2

PO3

PO4

PO5

PO6

PO7

PO8

PO9

PO10

 

 

 

 

 

 

 

  

 

 

 

 

 

 

PROJECT WORK

1

3

3

2

1

0

0

3

2

3

Level 3- Highly Addressed, Level 2-Moderately Addressed, Level 1-Low Addressed.

Method is to relate the level of PO with the number of hours devoted to the COs which address the given PO. If >40% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 3

If 25 to 40% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 2 If 5 to 25% of classroom sessions addressing a particular PO, it is considered that PO is addressed at Level 1

If < 5% of classroom sessions addressing a particular PO, it is considered that PO is considered not-addressed.

 

Text Box: 1. PROJECT WORK:	39 HRS

 

A.   INTRODUCTION

 

The objective of the project work is to enable the students in convenient groups of minimum of 5 members on a project involving theoretical and experimental studies related to the  branch of study. Every project work shall have a guide who is the member of the faculty of the institution. Six periods per week shall be allotted in the time table and this time shall be utilized by the students to receive the directions from the guide, on library reading, laboratory work, computer analysis or field work as assigned by the guide and also to present in periodical seminars on the progress made in the project.

B.   ROAD MAP FOR THE PROJECT

 

1.       Carry out a session or a seminar from the ISTE Student Chapter coordinator / Programme coordinator with the help of Innovation club / I I I cell for directing the students to identify project areas in the field of their interested including interdisciplinary areas.

2.       Power point presentation in seminar should include detail description of project areas related to program, Project report formats, developing personnel writing skills.

3.       The Students/Departments may at liberty to form the batch not less than 5 and maximum 8 and get registered with project coordinator/HOD at the end of V semester.

4.       Students should take the approval from the Project committee/ Head of department for doing project.

5.       After approval the batch of students will be published in department notice board along with guide in the end of 5th semester.

6.       All students should finalize their Project immediately before commencement of SEE of 5th semester.

7.       The types of project may include:

å         Industrial case study


å         Preparation of a feasibility report

å         Design and development of equipment.

å         The overhauling of existing equipment

å         Creation of New facilities

8.       The project should be challenging but manageable within the resources and time available.

9.       Students should undergo reviews for one times in5th and one times in 6th semester during the internal assessment. Time table for IA should include project review. The guide should monitor the progress of Project work periodically and it should be finally evaluated for 25 marks at the end of 5th semester and for 25 marks at the end of 6th semester.

10.   The IA marks will be evaluated based on oral presentation and assessment by the internal guide by adopting Rubrics being developed by Project committee.

11.   Real time problems, Industry related problems, should be chosen and it is a Responsibilities of the project committee / Programme coordinator/ Innovation club /

I.I.T. cell to choose the appropriate project and to accept the Project Proposal

12.   Identification of Topic: The selection of topic is of crucial importance. It should be field of interest. It is advisable to choose the project can be completed on time and within the budget and resources. The topic should be clear, directional, focussed and feasible.

13.   An outline of project proposal submitted & synopsis from student will initiate a dialogue between Student and Project coordinator who will then help you to work on the chosen topic and report.

 

C.   Industrial visit                                                                             

 

Students are required to undergo an industrial visit for period of at least 3(Three) working days, in V semester only. After completion of their visit the reports should be prepared. Each Student should write the report independently in view of his own observation in industry. All days for the visit should be accounted for clearly giving attendance particulars. The concern accompanying staff is to check student presence and access progress periodically

D. l report                                                                              

 

Students are required to submit a comprehensive report on factory visit with details of the organization where the training was undergone. The comprehensive report should focus on study of plant/ product /process/ along with intensive in-depth study on anyone of the topics such as processes, methods, tooling, plant layout and equipment, highlighting aspects of quality, productivity of the system. Any data, drawings etc should be incorporated with the consent of the Organization. The comprehensive report should be submitted for the end exam for evaluation

E.   Thrust areas identified for Project work     Each student may be assigned any one of the following types of project/thesis work: According to the local needs, the following major projects are suggested:

1.  Non-conventional energy


-       Low Cost Solar Water Heating System for Domestic Purpose

-       Fabrication of Solar cooker

-       Study of Community Biogas Plant

-       Fabricate a thermally efficient wood burning stove

-       Solar lamps

-       Solar powered refrigerator

2.  Mechatronics/Material handling area

-       Motorized object lifting jack

-       Key controlled- fork lifter

-       Object counting machine

-       Stepper motor control with selected steps for conveyor belts

-       Robotic arm with gripper

-       Material handling device in X,Y,Z motion control

-       Robotic crane

-       Robotic trolley for material handling

3.  Fluid power and control area Pneumatic/Hydraulic jack Pneumatic/hydraulic crane Air compressed spray gun Pneumatic transport system

4.    Automobile related area

Regenerative braking system Steering controlled headlight

Engine/motor vibration checker Seat belt automatic locking system Hydraulic braking

Electromagnetic shock absorber Digital auto speed limiter

5.  Motorized wheel chair

6.  Design and Fabrication of various types of lab equipment’s useful to polytechnic

7.    Repair and overhauling of various machine tools and lab equipment’s available at polytechnic

8.  Critical Study of existing quality systems and inventory control at industry

9.    Mechanical industry fabrication related projects

10.  Automatic mopping machine to clean the floor area

11.  Automatic milling machine with digital control

12.  PCB fabrication

13.  Any study project related to Mechanical and allied areas in industry

14.  Any project related to industry based problems 15 .Any projects related to low cost automation


F.  Course Assessment and Evaluation Scheme for Project work

 

 

What

To whom

When/Where

(Frequency    in course)

 

the

Max Marks

Evidence collected

Course outcomes

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

At           the 5 semester)

end

of

 

 

25

1.   Project Synopsis.

2.   Plan & Schedule

3.   Industrial visit report

 

CO1, CO2, CO3,CO4,CO5

At      the

6 semester)

end

of

 

 

25

1.   Project Report.

2.   Presentation hand outs

 

CO1, CO2, CO3,CO4,CO5

 

End of the course

 

Project report project model/Study report

SEE

End

Exam

 

 

Student Feedback on

course

 

 

 

 

 

Middle of the course

 

Feedback forms

CO1Delivery of course

End of Course Survey

 

 

End of the course

 

 

Questionnaires

CO1 to CO5

Effectiveness of Delivery of

instructions &

Assessment Methods

*CIE – Continuous Internal Evaluation         *SEE – Semester End Examination

 

 

G.  Project report

 

The Project Report should consist of following items.

 

1.     Introduction

2.     Review of Literature

3.     Study Area

4.     Methodology/Design/fabrication/Tests

5.     Result and Discussion

6.     Conclusion and scope for future study

7.     References.

1.  Project reports should be typed neatly in Times New Roman letters with font size 14 for titles and 12 for text on both sides of the paper with 1.5 line spacing on a A4 size paper (210 x 297 mm). The  margins should be: Left - 1.5",   Right - 1", Top and   Bottom - 0.75".

2.  The total number of reports (Soft bound) to be prepared are

ß     One copy to the department /library


ß     One copy to the concerned guide(s)

ß     One copy to the candidate.

3.   Before taking the final printout, the approval of the concerned guide(s) is mandatory and suggested corrections, if any, must be incorporated.

4.  Every copy of the report must contain

ÿ Inner title page (White)

ÿ Outer title page with a plastic cover

ÿ Candidate declaration and Certificate in the format enclosed both from the institution and the organization where the project is carried out.

ÿ An abstract (synopsis) not exceeding 100 words, indicating salient features of the work.

5.  The organization of the report should be as follows

 

1. Inner title page

 

2. Abstract or Synopsis

 

3.     Acknowledgments

4.     Table of Contents

Usually                numbered in roman

5. List of table & figures (optional)

 

Chapters(to be numbered in Arabic) containing Introduction-, which usually specifies the scope of work and its importance and relation to previous work and the present developments, Main body of the report divided appropriately into chapters, sections and subsections.

The chapters, sections and subsections may be numbered in the decimal form for

e.g. Chapter 2, sections as 2.1, 2.2 etc., and subsections as 2.2.3, 2.5.1 etc.

The chapter must be left or right justified (font size 16). Followed by the title of chapter centered (font size 18), section/subsection numbers along with their headings must be left justified with section number and its heading in font size 16 and subsection and its heading in font size 14. The body or the text of the report should have font size 12.

The figures and tables must be numbered chapter wise

The last chapter should contain the summary of the work carried, contributions if any, their utility along with the scope for further work.

Reference or Bibliography: The references should be numbered serially in the order of their occurrence in the text and their numbers should be indicated within square brackets for e.g. [3]. The section on references should list them in serial order in the following format.

1.           For textbooks – Dr.Paramar S, Welding process and technology, Khanna publishers, New Delhi, 2 Edition, 2003.

2.           For papers – Y.Javadi and I.sattari, Welding distortion in pipes, Journal of pressure vessels and piping, Vol 85, Aug 2008, pp 337-343


Only SI units are to be used in the report. Important equations must be numbered in decimal form for e.g.

ß      V = IZ                                      ..........                  (3.2)

All equation numbers should be right justified.

Separator sheets, used if any, between chapters, should be of thin paper

H.C  IE ASSESSMENT FOR  FIRST  REVIEW( V Semester)

1.     Project identification                                                                               05 mark

2.  Project synopsis                                                                                 10 mark

3.  Industrial visit & Report 10mark

 

Text Box: 25 Marks

MODEL OF RUBRICS FOR ASSESSING REVIEWS  OF PROJECT FOR CIE                                                                                                    

 

Student

name

Reg

no

Dimension

Scale

Students Score

 

 

 

Unsatisfactory

Developing

satisfactor

y

Good

Exemplary

1

2

3

4

5

 

 

Collects

Collect much

informati on; but very

limited relate to

the topic

Collects

Collects a

 

 

 

 

 

 

Does not

very

some

great deal

Collection of data

collect any

information relating to

limited

informatio n; some

basic

informati on; most

of

informati on; all

 

the topic

relate to

refer to

refer to

 

 

the topic

the topic

the topic

 

Does not

Performs very little duties but unreliable.

 

 

Performs

 

 

 

 

 

Fulfil

perform any

Performs

Performs

all duties

team’s roles

duties

very little

nearly all

of

& duties

assigned to

duties

duties

assigned

 

the team role

 

 

team roles

 

 

Shares work equally

 

 

Always relies on others to do the work

Rarely does the assigned work; often needs

reminding

Usually does the assigned work; rarely needs

reminding

 

 

Normally does the assigned work

Always does the assigned work without having to be

reminded.

 

 

 

 

 

 

 

Listen to other Team mates

 

Is always talking;

never allows anyone else to speak

Usually does most of the

talking; rarely allows

others to speak

Talks good; but never show

interest in listening others

 

Listens, but sometime s talk too much

 

Listens and speaks a fair

amount

 

 

 

 

 

 

Grand Average/Total

 

 

 

 

 

 


                                                    APPENDIX 1 (Cover page)                                                   

(A typical Specimen of Cover Page )<Font Style Times New Roman – Bold>

TITLE OF PROJECT REPORT

<Font Size 18><1.5 line spacing>

A PROJECT REPORT

<Font Size 14>

Submitted by

<Font Size 14><Italic>

NAME OF THE CANDIDATE(S)

<Font Size 16>

in partial fulfilment for the award of the diploma of

<Font Size 14><1.5 line spacing><Italic>

DIPLOMA IN MECHANICAL ENGINEERING PROGRAMME

<Font Size 16>

IN

DEPARTMENT OF MECHANICAL ENGINEERING

<Font Size 14> LOGO

 

 

 

NAME OF THE COLLEGE

<Font Size 14>

DEPARTMENT OF TECHNICAL EDUCATION BENGALURU-560001

<Font Size 16><1.5 line spacing>

Year of submission: ( MONTH & YEAR)

<Font Size 14>


                                                      APPENDIX 2 (Title page)                                                     

(A typical Specimen of Title Page) <Font Style Times New Roman – Bold>

A Project Report on

 

<TITLE OF THE PROJECT WORK>

 

 

Submitted for partial fulfilment of the requirements for the award of the of

 

DIPLOMA IN CIVIL ENGINEERING

 

 

BY

BATCH

<Mr. / Ms. Name of the Student (Roll No.)>

<Mr. / Ms. Name of the Student (Roll No.)>

<Mr. / Ms. Name of the Student (Roll No.)>

<Mr. / Ms. Name of the Student (Roll No.)>

<Mr. / Ms. Name of the Student (Roll No.)>

 

Under the guidance of

 

<Name of the Staff>

Lecturer Department of ME GPT, Place--------

 

 

 

 

 

 

 

Department of Mechanical Engineering

<<NAME OF INSTITUTE>>

<<ADDRESS OF INSTITUTE>>


                                                     APPENDIX 3 (Certificate)                                                    

 

(A typical specimen of Bonafide Certificate)

<Font Style Times New Roman>

 

DEPARTMENT OF TECHNICAL EDUCATION BENGALURU-560001

<Font Style Times New Roman – size -18>

 

BONAFIDE CERTIFICATE

<Font Style Times New Roman – size -16>

 

<Font Style Times New Roman – size -14>

 

Certified      that      this      project      report      “……….TITLE      OF THE PROJECT……………..”is the bonafide work of “     NAME OF THE

CANDIDATE(S).…………”who carried out the project work under my supervision.

 

 

 

<<Signature of the Head of the Department>>                                                                                 <<Signature of the Project cordinator>>

 

SIGNATURE                                                                            SIGNATURE

 

<<Name>>                                                                                <<Name>>

 

HEAD OF THE DEPARTMENT                                                                                  PROJECT CORDINATOR

 

<<Academic Designation>>

 

<<Department>>                                                                                  Department of Mechanical Engineering

 

<<Full address of the Dept & College >>                                                                                      <<Full address of the Dept & College >>

 

 

Examiners 1......................<<Signature, Name, Designation& Address>>........

 

Examiners 2......................<<Signature, Name, Designation& Address>>........


 

 

 

 CANDIDATE’S DECLARATION

 

 

I, ------------------------------------------ a  student of Diploma in                                                         - Department bearing  Reg  No                              of                                                                                                                                                                                                                               - hereby declare that I own full responsibility for the information, results and conclusions provided in this project  work titled                                                                                                                                                                                        “submitted

to State Board of Technical Examinations, Government of Karnataka for the award of Diploma in                                                .

To the best of my knowledge, this project work has not been submitted in part or full elsewhere in any other institution/organization for the award of any certificate/diploma/degree. I have completely taken care in acknowledging the contribution of others in this academic work. I further declare that in case of any violation of intellectual property rights and particulars declared, found at any stage, I, as the candidate will be solely responsible for the same.

 

 

 

 

Date:

 

 

Place:                                                                                      Signature of candidate

Name: -----------------


---

 

--


Reg No-----------------


 

 

 

DEPARTMENT OF TECHNICAL EDUCATION NAME OF THE INSTITUTION

Address with pin code

 

Department of ……………………………………………………..

 

CERTIFICATE

Certified that this project report entitled ----------------------------------------------------------------

 

---- ----------------------------------------------------------------------------------------”which  is being

 

submitted by Mr./Ms. ………………………….……………….., Reg. No…..……………, a bonafide student of …………………………………….in partial fulfilment for the award of Diploma in -----------------Engineering during the year ……………………... is record of students own work carried out under my/our guidance. It is certified that all corrections/suggestions indicated for internal Assessment have been incorporated in the Report and one copy of it being deposited in the polytechnic library.

The project report has been approved as it satisfies the academic requirements in respect of Project work prescribed for the said diploma.

It is further understood that by this certificate the undersigned do not endorse or approve any statement made, opinion expressed or conclusion drawn there in but approve the project only for the purpose for which it is submitted.

Guide(s)

 

Name and signature

 

Examiner 1

2                                                                          Head of Department

 

Dept. of                      


Format of Synopsis

 

1.      Title of the Project

 

2.      Objectives of the study

 

3.      Rationale for the study

 

4.      Statement of the Problem

 

5.      Detailed Methodology to be used for carrying out the study

 

6.      The expected contribution from the study (to perform any laboratory experiments)

 

7.      List of activities to be carried out to complete the project (with the help of a bar chart showing the time schedule)

8.      Places/labs/equipment and tools required and planning of arrangements

 

9.      Problems envisaged in carrying out the project, if any.

 

10.   Brief description of project in 100 words

 

 

 

Z

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


13


APPENDIX-7 (PROJECT-TIME LINE)

 
 

 

 


TASK

 

Responsibility

END OF

 

V SEMESTER

 

VI SEMESTER

 

WEAKS

 

11

12

13

14

15

1

2

3

4

5

6

7

8

9

10

11

12

13

14

1

Industrial visit

Students/Faculty

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

Seminar regarding Project work

Project Com/HOD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

2

Batch formation &Guide allocation

HOD

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

3

Identification of project

Students/Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

4

Project synopsis Submission

Students

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

5

Finalisation of Project

Students/Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6

Literature survey

Students/Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

7

Identification of facility to do PW

Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

8

Study/Fabrication/design of model

Students/Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

9

Results discussion/performance testing

Students

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

10

Review of Project work by guide

Students

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

11

Project report submission

Students/Guide

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


Popular Posts